Beeketal

Beeketal stainless steel sausage filler BT/BTH-series 3-15L incl. 5 filling spouts + 3 seals


Item number 437

Variantennummer:BT/BTH-Serie


* Incl. VAT excl. Shipping

 

Beeketal stainless steel sausage filler in different versions!

You can select the appropriate version above in this offer!

 

Technical data:
 

Model: Volume: Dimensions: Cylinder dimension: Height with extended
plunger:
Net weight:
BT03 3 litres approx. 30 x 34 x 57 cm 140 x 200 mm approx. 76 cm approx. 8,5 kg
BT05 5 litres approx. 30 x 34 x 69 cm 140 x 320 mm approx. 99 cm approx. 9,5 kg
BT07 7 litres approx. 30 x 34 x 83 cm 140 x 460 mm approx. 127 cm approx. 11 kg
BT10 10 litres approx. 30 x 33 x 58 cm 219 x 270 mm approx. 92 cm approx. 14,5 kg
BT12 12 litres approx. 30 x 33 x 63 cm 219 x 320 mm approx. 105 cm approx. 15 kg
BT15 15 litres approx. 30 x 33 x 71 cm 219 x 400 mm approx. 116 cm approx. 16,5 kg
BTH03 3 litres approx. 24 x 23 x 47 cm 140 x 200 mm   approx. 7,5 kg
BTH05 5 litres approx. 24 x 23 x 59 cm 140 x 320 mm   approx. 9 kg
BTH07 7 litres approx. 83 x 23 x 24 cm 140 x 460 mm   approx. 10,5 kg

 


(Shows model BT07)

 


-  Our Beeketal sausage filler BT05 was awarded as comparison winner  -

 

                                

 

 

We at Beeketal are occasionally asked by our customers about the differences with cheaper products.

With the comparison shown below we would like to show you the differences between our quality products and the cheaper products of our competitors.

Convince yourself of our high quality products!

    

 

 

 

 

 

Stainless steel housing and cylinder
 

Incl. 5 filling nozzles 10 - 16 - 22 - 32 and 38 mm
 

 Hardened 2 speed gearbox
 

Incl. 2 spare sealing rings (3 in total)
 

 Valve for venting (stainless steel)
 

 Solid construction
 

International hygiene standard
 

With SGS certificate
 

  Detergent resistant
 

 Stainless


(Shows model BTH05)

 

 

Beeketal: Stainless steel sausage filler BT/BTH series:

The BT sausage fillers have a capacity of optionally 3-15 litres and are completely made of made of high quality stainless steel stainless steel.

With this model comes our hardened 2 speed full metal gearbox is used.
This gear makes the work noticeably easier and is used in all sausage fillers of the Beeketal BT, BTH and MT series.
To fill the sausage stuffer, the cylinder is unlocked and removed sideways (vertical model), or upwards after unlocking (horizontal model).
The filling tubes are screwed onto the thread at the bottom by means of a union nut.
These sausage fillers also have a vent valve on the upper side of the plunger, with which excess air in the filling material can be released. In the pressure plate of the pressure plunger there is a high-quality silicone seal.
On the side of the sausage stuffer there are two gear rims for either fast or slow operation, on which the drive crank is inserted.
The Beeketal sausage fillers are suitable for all types of sausage.