Beeketal stainless steel sausage filler in different versions!
You can select the appropriate version above in this offer!
|Model:||Volume:||Dimensions:||Cylinder dimension:||Height with extended |
|BT03||3 litres||approx. 30 x 34 x 57 cm||140 x 200 mm||approx. 76 cm||approx. 8,5 kg|
|BT05||5 litres||approx. 30 x 34 x 69 cm||140 x 320 mm||approx. 99 cm||approx. 9,5 kg|
|BT07||7 litres||approx. 30 x 34 x 83 cm||140 x 460 mm||approx. 127 cm||approx. 11 kg|
|BT10||10 litres||approx. 30 x 33 x 58 cm||219 x 270 mm||approx. 92 cm||approx. 14,5 kg|
|BT12||12 litres||approx. 30 x 33 x 63 cm||219 x 320 mm||approx. 105 cm||approx. 15 kg|
|BT15||15 litres||approx. 30 x 33 x 71 cm||219 x 400 mm||approx. 116 cm||approx. 16,5 kg|
|BTH03||3 litres||approx. 24 x 23 x 47 cm||140 x 200 mm||approx. 7,5 kg|
|BTH05||5 litres||approx. 24 x 23 x 59 cm||140 x 320 mm||approx. 9 kg|
|BTH07||7 litres||approx. 83 x 23 x 24 cm||140 x 460 mm||approx. 10,5 kg|
(Shows model BT07)
- Our Beeketal sausage filler BT05 was awarded as comparison winner -
We at Beeketal are occasionally asked by our customers about the differences with cheaper products.
With the comparison shown below we would like to show you the differences between our quality products and the cheaper products of our competitors.
Convince yourself of our high quality products!
Stainless steel housing and cylinder
Incl. 5 filling nozzles 10 - 16 - 22 - 32 and 38 mm
Hardened 2 speed gearbox
Incl. 2 spare sealing rings (3 in total)
Valve for venting (stainless steel)
International hygiene standard
With SGS certificate
(Shows model BTH05)
Beeketal: Stainless steel sausage filler BT/BTH series:
The BT sausage fillers have a capacity of optionally 3-15 litres and are completely made of made of high quality stainless steel stainless steel.
With this model comes our hardened 2 speed full metal gearbox is used.
This gear makes the work noticeably easier and is used in all sausage fillers of the Beeketal BT, BTH and MT series.
To fill the sausage stuffer, the cylinder is unlocked and removed sideways (vertical model), or upwards after unlocking (horizontal model).
The filling tubes are screwed onto the thread at the bottom by means of a union nut.
These sausage fillers also have a vent valve on the upper side of the plunger, with which excess air in the filling material can be released. In the pressure plate of the pressure plunger there is a high-quality silicone seal.
On the side of the sausage stuffer there are two gear rims for either fast or slow operation, on which the drive crank is inserted.
The Beeketal sausage fillers are suitable for all types of sausage.